|
|
.............................................................................................................................................................................................................................................................
ANN-80 80-Character LCD Serial Annunciator
Features
- Backlit 80-character LCD display (20 characters x 4 lines)
- Mimics all display information from the host panel.
- Control switches for System Acknowledge, Signal Silence,
Drill, and Reset.
- Control switches can be independently enabled or disabled
at the FACP.
- Keyswitch enables/disables control switches and mechanically
locks annunciator enclosure
- Keyswitch can be enabled or disabled at the FACP.
- Enclosure supervised for tamper.
- System status LEDs for AC Power, Alarm, Trouble, Supervisory,
and Alarm Silence.
- Local sounder can be enabled or disabled at the FACP.
- ANN-80 connects to the ANN-BUS terminal on the FACP and
requires minimal panel programming.
- Displays device type identifiers, individual point alarm,
trouble,
supervisory, zone, and custom alpha labels.
- Time-and date display field.
- Aesthetically pleasing design constructed of durable Lexan.
- Surface mount directly to wall or to single, double, or 4"
square electrical box.
Specifications
- Operating voltage range: 18 VDC to 28 VDC
- Current consumption @ 24 VDC nominal (filtered and
nonresettable): 40 mA maximum.
- Ambient temperature: 32°F to 120°F (0°C to 49°C).
- Relative humidity: 93% ± 2% RH (noncondensing) at 32°C ± 2°C
(90°F ± 3°F).5.375” (13.65 cm.) high x 6.875” (17.46 cm.) wide x 1.375”
(3.49 cm.) deep. For use indoors in a dry location.
- All connections are power-limited and supervised.
|
