.............................................................................................................................................................................................................................................................
H355(A) Series Intelligent Addressable Thermal (Heat) Detectors for MS-9600, MS-200UD
FEATURES
SLC loop:
- Two-wire SLC loop connection.
- Unit uses base for wiring
- Addressable by device.
- Direct Decade 01 – 159 (MS-9600), or 01 – 99 (MS-9200UD) entry
of address.
Architecture:
- Sleek, low-profile, stylish design.
- State-of-the-art thermistor technology for fast response.
- Integral communications and built-in device-type
identification.
- Built-in tamper resistant feature.
- Built-in functional test switch activated by external magnet.
Operation:
- Factory preset at 135°F (57°C).
- Rate-of-rise model (H355R), 15°F (8.3°C) per minute.
- 360°-field viewing angle of the visual alarm indicators (two
bicolor LEDs). LEDs blink green in Normal condition and turn on steady
red in Alarm.
- Visible LEDs “blink” every time the unit is addressed.
SPECIFICATIONS
Diameter: 6.1" (15.5 cm) installed in B350LP.
Height: 2.1" (5.33 cm).
Weight: 4.8 oz. (137 g).
Installation temperature: –4°F to 100°F (–20°C to 38°C).
Humidity range: 10% to 93% relative humidity (non-condensing).
Voltage range: 15 to 32 VDC peak.
Standby current: 300 μA @ 24 VDC (one communication every 5 seconds
with LED blink enabled).
LED current: 6.5 mA @ 24 VDC.
Mounting: B350LP flanged base, included.
Fixed-temperature setpoint: 135°F (57°C).
Rate-of-rise detection: responds to greater than 15°F/ 8.3°C per
minute.
Recommended spacing: 50' (15.24 cm) for both 190° fixed and 135°
fixed/rate-of-rise models (UL and FM listed distances).
| 
