MS-9200UDLS(E)

.............................................................................................................................................................................................................................................................

MS-9200UDLS(E) Intelligent Addressable FACP with Built-In Communicator

Features

On-board DACT.
Four Style Y (Class B) or two Class A (Style Z) NAC circuits.– 6.0 amps total NAC power with optional XRM-24.
Selectable strobe synchronization for System Sensor, Wheelock, and Gentex devices.
Complies with UL 864 9th Edition requirements.
Remote Acknowledge, Silence, Reset and Drill via addressable monitor modules.
Up to 32 ACM Series (ACM-16AT or ACM-32 series) annunciators or LCD-80F remote annunciators via EIA-485.
EIA-232 printer/PC interface (variable baud rate) on main circuit board.
Integral 80-character LCD display with backlighting.
Real-time clock/calendar with automatic daylight savings control.
Detector sensitivity test capability (NFPA 72 compliant).
History file with 1,000-event capacity.

Electrical Specifications

AC Power:

MS-9200UDLS: 120 VAC, 60 Hz, 3.0 amps. MS- 9200UDLSE: 240 VAC, 50 Hz1.5 amps. Wire size:minimum 14 AWG (2.00 mm²) with 600 V insulation.

Battery:

Two 12 V 18AH lead-acid batteries. Battery charger capacity: 7 – 18 AH. MS-9200UDLS cabinet holds maximum of two 18 AH batteries.

Communication Loop: Supervised and power-limited.

Notification Appliance Circuits:

Each terminal block provides connections for two Style Y (Class B) or one Style Z
(Class A) for a total of four Style Y (Class B) or two Style Z (Class A) NACs. Maximum signaling current per circuit: 2.5 amps. End-of-Line Resistor: 4.7K ohm, 1/2 watt (P/N 71252
UL listed) for Style Y (Class B) NAC. Refer to panel documentation and Fire Lite Device Compatibility Document for listed compatible devices.]

Two Programmable Relays and One Fixed Trouble Relay:

Contact rating: 2.0 amps @ 30 VDC (resistive), 0.5 amps @ 30 VAC (resistive). Form-C relays.

Special Application Power (24 VDC Nominal):

Jumper selectable (JP4) for conversion to resettable power output. Up to 0.5 amps total DC current available from each output. Power-limited.

For More Details Please Click here ...