fire alarm system >> firex - USA

........................................................................................................................................................................................................................................................................

FIREX STAND ALONE SMOKE DETECTORS

The market leader in fire safety products. This is a stand alone smoke detector with dual ionization smoke sensing chamber. It is a UL approved product. They are fast and easy to install and mounted on a braket which needs no wiring and it runs on a 9V DC battery . The horn output is 85 decibels at 10ft. These smoke alarms should be placed in family household, in each individual unit of multiple-family buildings, school, colleges, homes, offices, factories and just any where.

FEATURES

Dual ionization smoke sensing chamber – Early detection of fast burning fires

such as gasoline, cooking grease and paper

Installation design and feature similar to other Firex smoke alarms –

Contractor familiarity with installation

Light Power / Alarm LED – Confirms unit is receiving power.

Incorporates Firex installer focused innovation – Fastest and easiest installation

available

Factory sealed housing – Prevent tampering and provides outstanding durability

WHY INSTALL FIREX DC IONIZATION SMOKE ALARMS

Firex DC ionization smoke alarms contractors and homeowners with the reliable and trouble-free performance they expect from.. the market leader in fire safety product, With installer focused innovation such as “positive snap” battery connection to ensure proper battery installation separated mounted without a battery , Firex DC ionization smoke alarms have earned their reputation as the most preferred smoke alarms among contractors.

ARCHITECTURAL SPECIFICATION

The smoke alarm shall be a styleline design TM (1-1/8” high, 4” wide ). Powered by a 9V DC, battery power source and a dual ionization sensing chamber and sealed housing with a separate meta mounting bracket . The alarm shall produce two short chirp approximately 2 seconds apart at the conclusion of the desensitized period . Normal sensitivity shall be measured by U.L. at obs . 1.1 +- 0.47%ft. and by U.L.C. at 1.1%. Temperature operating range shall be between 40o and 100o F(4 – 38 C): humidity range between 10% - 93% relative humidity: 100% solid state alarm circuits over an input range of 7-10V DC. A power on indicator shall be a built-in light emitting diode which “blinks” once per minute in the standby condition . A 30 day low battery signal shall be a include added safety. The test switch shall electronically activate the chamber to simulate smoke and check fir proper operation. The electronic horn shall have a level of decibels at 10 feet. The 462 shall meet the requirement of U.L. Standard 217.

For More Details Please Click here ...