fire alarm
system >>
system sensors >> heat detector
5351
...........................................................................................................................................................................................................................................................................
Features
Low profile
design
Low current
draw
Backward
compatible with Series 100 detector range of bases
Wide
operating voltage 8 to 30VDC
Bi-colour
LED detector status indicator
Programmable
sensitivity
Addressable
feature
Advanced
maintenance features via remote hand-held test unit
Range of
detector bases available
Approved to
EN54 – 5:2000 Class A1R (Amendment 1)
Architectural/Engineering
Specifications
5351E Rate of Rise & Fixed Temperature
Thermal Detector
In addition to the comprehensive programming tool, a simple laser based
alarm test unit is also available. The coded signal transmitted by this
device can instruct the detector to generate a full alarm condition at a
range of up to 5 meters from the detector, and is an ideal tool for
initial commissioning and routine system testing. A variety of detector
bases can be used with the 5351E detector, providing application
flexibility and compatibility with a wide range of Fire Alarm Control
Panels. All bases are fitted with a shorting spring to permit circuit
testing prior to fitting the detector and have a tamper resistant
feature, which when activated prevents removal of the detector without
the use of a tool. All System Sensor products are covered by our
extended 3 year warranty.
|
Electrical Specifications |
| Operating
Voltage Range |
8 to 30VDC
(Nominal 12/24VDC) |
| Typical
Standby Current @ 25°C |
60μA @ 24VDC
(LED no blink) |
|
Maximum Permissible Alarm Current (LEDOn) |
80mA @ 24VDC (Limited by panel) |
|
Environmental Specifications |
|
Operating Temperature Range |
-30°C to +70°C |
|
Humidity |
5
to 95% Relative Humidity
(non condensing) |
|
Mechanical Information |
|
Height |
48mm (plus 9mm for B401 base) |
|
Diameter |
102mm |
|
Weight |
105g (plus 60g for B401 base) |
|
Wire Gauge for Terminals |
0.75mm2 to 2.5mm2 |
|
Colour |
Pantone, warm grey 1C |
|
Material |
Bay blend FR110 |
|
Product Range |
|
Bases (see notes) |
B401 Standard Base B401SD Standard base with schotty diode
B401R Resistor base with 470 ohm resistor B401RSD Standard base
with 470 ohm resistor and Schotty diode
B401RM Standard recess base with 470 ohm resistor B401DG Deep
base
B401DGR Deep base with 470 ohm resistor B401DGSD Deep base with
Schotty diode
B312NL 12V non-latching relay base B312RL 12V latching relay
base
B324RL 24V latching relay base |
|
Accessories |
S300RPTU Remote Programming and Test
Unit S300RTU Remote Test Unit
S300SAT Remote Programming Interface Unit S300ZDU Zonal Display
Unit |
|
Other Detectors |
2351E, 2351TEM, 4351E, 5351TE |
