Our Products

Fire Alarms Systems  
Fire Suppression Systems  
Security Systems  
Perimeter Protection  
Building Management System  
Home Automation System  
Cables  

Please Click Here

Fire Suppression Systems>>Tyco Sprinklers >>Pendant type Sprinklers

..........................................................................................................................................................................................................................................................................

General Description

The Series TY-B, 2.8, 5.6, and 8.0 K-factor, Upright and Pendent Sprinklers described in this data sheet are standard response - standard coverage, decorative 5 mm glass bulb type spray sprinklers designed for use in light, ordinary, or extra hazard, commercial occupancies such as banks, hotels, shopping malls, factories, refineries, chemical plants, etc. The recessed version of the Series TY-B Pendent Sprinkler, where applicable, is intended for use in areas with a finished ceiling. It uses a two-piece Style 10 (1/2 inch NPT) or Style 40 (3/4 inch NPT) Recessed Escutcheon. The Recessed Escutcheon provides 1/2 inch (12,7 mm) of recessed adjustment or up to 3/4 inch (19,1 mm) of total adjustment from the flush pendent position. The adjustment provided by the Recessed Escutcheon reduces the accuracy to which the fixed pipe drops to the sprinklers must be cut.

Corrosion resistant coatings, where applicable, are utilized to extend the life of copper alloy sprinklers beyond that which would otherwise be obtained when exposed to corrosive  atmospheres. Although corrosion resistant coated sprinklers have passed the standard corrosion tests of the applicable approval agencies, the testing is not representative of all possible corrosive atmospheres. Consequently, it is recommended that the end user be consulted with respect to the suitability of these coatings for any given corrosive environment. The effects of ambient temperature, concentration of  chemicals, and gas/chemical velocity, should be considered, as a minimum, along with the corrosive nature of the chemical to which the sprinklers will be exposed. An intermediate level version of the Series TY-B Pendent Sprinkler can be obtained by utilizing the Series TY-B Pendent Sprinkler in combination with the Model S2 Shield.  

 

K Type

SPRINKLER FINISH

Natural Brass

Chrome
Plated

White Polyester Lead Coated Wax Coated Wax Over
Lead Coated
2.8
1/2"
NPT
Pendent (TY1251)
and
Upright (TY1151)
175 PSI (12,1 BAR) N/A
5.6
1/2"
NPT
Pendent (TY3251)
and
Upright(TY3151)
250 PSI (17,2 BAR)
OR
175 PSI (12,1 BAR)
(SEE NOTE 1)
175 PSI (12,1 BAR)
Recessed Pendent(TY3251) N/A
8.0
3/4"
NPT
Pendent(TY4251)
and
Upright (TY4151)

175 PSI (12,1 BAR)

Recessed Pendent(TY4251) 175 PSI (12,1 BAR)  
8.0
1/2"
NPT
Pendent(TY4951)
and
Upright (TY4851)

175 PSI (12,1 BAR)

|Home |Profile|Services|Channel Partners|Clients|Downloads|Careers|Online Enquiry|Contact Us|Sitemap|